RAKENNUSRUUVI UPPO 8,0X295 TX40 TÄYSK. KONSTRUX RBS

KonstruX fully threaded screw

High extraction resistance
  Strong joints

Benefits of NEW drill point

Reduced screwing torque
  Greater extraction resistance

KonstruX fully threaded screw

The powerful solution for construction and renovation

One system for all timber-frameconstruction joints

Applications in timber engineering and carpentry, timber-frame construction, hall construction, construction of timber elements,renovation of ceilings, etc.
  Maximum load transmission KonstruX fully threaded screws maximise a joint‘s load-bearing capacity with a high thread-extraction resistance in both components. If partially threaded screws are used, the joint‘s load-bearing capacity is limited by the considerably lower head pull-through resistance in the attached part.
  A time- and cost-saving alternative to traditional connections or timber joints such as joist hangers, joist supports, etc.
  Timber has a low transverse compressive and shear strength. KonstruX fully threaded screws are inserted into the timber for reinforcement. The KonstruX “takes on” a large proportion of the forces.
  Doubling up of joists, for example, increases the load-bearing capacity of floor joists and reduces bending. Here, KonstruX fully threaded screws join the components together in a displacement-resistant manner.
  Hidden connections, high fire-resistance, no thermal bridges
  No pilot-drilling required in accordance with approval/ETA From screw lengths = 245 mm, however, pilot-drilling to 1/3 of the screw length is advisable to guide the screw in the right direction (no screw wandering). Pre-drilling is required for soft wood, please check page 2 of the product data sheet.
  The required edge and centre distances can be minimised for screws that are only exposed to tension.